Timbco Feller Bunchers For Sale

Location: ALLENWOOD, PA

LITTLE VALLEY, NY LOCATION

Location: Boonville, NY

Location: ALLENWOOD, PA

2006 TIMBCO 425EXL FELLER BUNCHER #14682

2004 Timbco 425EXL Approx 10k hours T-33 bar saw One recent final drive New tram pump 2 new head rotation motors Complete new main valve body seal kit Runs and operates good Woods ready REDUCED PRICE

2005 Timbco 445EXL Feller Buncher, Equipped with a Quadco 22" 360 Wrist Saw, Enclosed Cab with Heat and Air Conditioning, Leveling Cab, Good Undercarriage 70%, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 425 EXL Feller Buncher Equipped with A Quadco 22" 360 Degree Saw Head, NEW Cummins Engine Installed, Under Factory Warranty, 7000 Frame Hours Undercarriage 80% Enclosed Cab with Heat and Air... Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Timbco 425 EXL ,Quadco 22B Hot Saw, Cummins Engine, 28” Double Grousers, Undercarriage 70%

2005 timbco 425exl -8.3 cummins -Heat/ac works great -U/C 90% -2015 quadco 22c hotsaw completely looked over -360 degree rotation on head -Machine runs and cuts wood daily

2004 TIMBCO 425EXL FELLER BUNCHER

1997 Timbco 445 Feller Buncher, Equipped with a Quadco 22" Saw Head with Lateral Tilt, Enclosed Cab with Heat and AC, Needs an Air Condenser installed,. Leveling Cab, Tilt Cylinder has New Seal Kit, Drive Motors are Remaned, New Final Bearing and Seals, New Lexan Glass. More Pictures Coming Soon. Weight 65,000 lbs Length 35' 6" Width 11' 2" Heigth 12' Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco 445D Feller Buncher, Cummins 8.3 Diesel Engine, Hours Unknown, Has 43" Bar Saw with 3/4" Pitch, Heavy Duty Cat D-7 Undercarriage is 70-75%, Enclosed Cab with Heat and Air Conditioning, Repleaced 3 Pumps (New), New Control Valve, $15,000.00 in 6000psi New Hoses installed, Ready for the Woods. Weight 65,000 lbs Length 35 ft 6 in Width 11 ft 2 in Height 12 ft 0 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Timbco 445EXL Feller Buncher, Includes a Quadco 22 360 Degree Head, Leveling Cab, Enclosed Cab with Heat and Air Conditioning, Frame Hours 14,000 Engine Rebuilt at 13,700 Hours, New Head, New updated Saw Motor, New Pins and Bushings between Stick and Boom, New Starter, Main Boom Rebuilt, New Fuel System, New Turbo, Rotor Bearings Replaced Undercarriage between 75 and 80% Ready for the Woods. Weight 62,629 lbs. Length 25 ft 4 in. Width 10 ft 4 in. Height 12 ft 6 in. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Timbco 425EX -19000 frame hours -22c Quadco 40 degree tilt head -8.3 cummins -D6 undercarriage -Heat/ac -New Bluetooth radio -Clean-fix reversing fan -Brand new track chains, drive sprockets, track hardware, track tensioner w/spring -Could use some tlc

1998 Timbco 425C Feller Buncher, Equipped with a Quadco 20" Saw Head, New Saw Disc with less than 200 Hours, 2400 Original Hours, Undercarriage is 75-80%, New Idlers, Pumps Rebuilt, Drive Motors Redone, New Hydraulic Cylinders Repacked on Saw Disc, Enclosed Cab with Heat and AC, Kenwood Surround Sound in Cab. Weight 55,235 lbs Length 21'4" Width 9'8" Height 12'2" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1993 Timbco 425D -4xxx on meter -Engine been rebuilt -Just replaced both track rails and sprockets have less that 10 hours on them -Idlers and rollers are in good shape -Everything works -Ac/heat -Radio -33” Timbco bar saw head -40 degree tilt -Cameras on the head and behind cab -All bushings are tight Ready to work very well maintained

2006 Timbco 425EXL 8800 hours, 8.3 Cummins, Quadco 20B 360 head. Engine and 1 pump done at 7000 hrs. Bottom in nice shape, runs and operates as it should. Heat and a/c work. Just repacked accumulator arm cylinders. Saw disc in good shape. Little bit of slack in leveling cylinders but currently on a job and 100% work ready for the next. Get in and go to work. Operating Weight 54,002 lbs Height - Top of Cab 12.4 ft Shipping Length - non tilt 14.6 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2000 Timbco 425C, 9063 hrs., all panels guards, and windows in good condition, Cummins 8.3 engine, w/2 speed Transmission, 28" double grouser style track pads at roughly 75%, Undercarriage at about 50%, Heat/AC, $82,000